Step By Step Guide On Repairing Garage Doors
Garage doors are important for the security of your vehicles and other stuff present inside it. It is not compulsory that you call a professional always to repair the doors. You can too do it on your own after reading this article. Read this comprehensive guide to repair your doors effectively and easily. There is no need to pay for the professional services all the time.
There are two vital components of the garage door; the opener and door itself. In this precise guide you will learn how you can repair both these components on your own. Starting with the main door
For the largest selection of garage doors in Santa Clarita, Brooks Garage Doors, here.
Garage door repair
There are different types of garage doors some are overhead doors, some swings up and are in one piece and this operate on the spring tension. These doors move on tracks which are made of metal and are placed on the walls of garage. The garage door moves on these springs and there is a heavy spring or spring that provides the door with the power to move. In the majority of the cases when the door is not working easily the repairs are easy to do and are simple as well. Here are few repairing tips from the expert Garage Door repair Kissimmee.
Step one
There are metal tracks present inside the garage ensure that they are working properly. Look at the brackets mounted on the wall that hold the tracks on walls. Check for the lose screws or bolts, over usage and opening and shutting down the garage doors are some of the reason these might get loosen. Examine them completely for crimps, dents or flat spots. If there are damaged spots repair them by pounding with a rubber mallet. You can use a block of scrap wood and hammer. If these tracks are damaged badly, then it should be replaced.
Step two
Check tracks with level to make sure that these are aligned properly. Horizontal tracks should be slanted and slightly down towards the garage back; with vertical sections and roll up doors it should be plumb exactly. Both the tracks should be placed at the similar heights on the walls of the garage. If you see disturbance in the alignment, then do not removes bolts or screws that holds the bracelet mounting, just tap tracks into position carefully. After that gain you should recheck the level to make sure that they are in the right position and then tighten bolts and screws at the brackets.
Step three
Use a household cleaner to clean the tracks to remove hardened grease and dirt. Clean rollers and then dry all the tracks.
Step five
There is hardware present that can loose with tight and needs to be tight.If there are swing doors, then check plates where springs are mounted and make sure that all the screws are tight enough. Check hinges that holds the section of the doors together and look for loose screws and tighten them as well. If there is replacement required go for it. If there is sagging at the one side of the door, then it can be corrected by servicing. If hole that holds the screw is enlarged, then replace the screws which have same diameter and also you can use a fiber plug that is hollow and dip it in carpenter’s glue.
For more info on garage doors, visit the 2016 Home and Garden Show. Click here to learn more.
Maintain tips
The garage doors are the largest movable parts of house and require constant repair and maintenance so that it can function properly. There are several tips available that can help homeowners in maintaining and repairing garage doors and here are some of them explained.
Resetting the opener of garage door
In the cases when garage door is not opening properly will need resetting. Each garage door is having different instructions for resetting, the most common step is shutting off the power, wait for few seconds and then turn the power back on. To close the door properly keeps the button pressed until it closes entirely. Then set its functions.
Weather seal installations
Those who are having automatic garage doors must consider installing weather seal because it will help them in saving huge amount of energy. It will also prevent the moisture from entering the garage and will also keep the garage parts well maintained. Seals are applied on the bottom of garage, door panels and frame of the door.
Cleaning the door track
If your door is not opening properly, then you can clean the tracks properly. Also make sure that you are using proper lubricants to clean the tracks because this will keep your garage door fully functional. Clean the tracks thoroughly with a damp cloth remove sticky residue and use a high quality lubricant to clean the tracks.
Important things to keep in mind
Garage doors are expensive and if maintained properly can serve you for many years. These days there are a variety of garage doors available including single doors, double doors, garage gates, automatic, manual etc. No matter what type of garage door you are having it is important that you maintain them from time to time so that costly repairs can be avoided. Automatic doors come with manuals and there is a maintained guide available. Makes sure that from time to time you are looking at the openers, screws, hinges etc and if replacement or repair is required you are not skipping this important part.
This way you will maintain your garage doors well and will also prevent heavy repairs cost. Sometimes people do not pay attention to the minor issues resulting in the complete replacement of doors or heavy repairs. It is very easy to repair your garage doors on your own and this guide will aid you well in fulfilling this task. Sometimes your knowledge can reward you back with lots of savings. Keep your garage door fully functional by repairing and maintaining it on your own. There is lots of assistance required online that will help you in taking care of your expensive garage doors well.