A well-maintained heating equipment is essential to ensuring your house is a toasty haven during winter. Don’t wait until the frost season; act now to ensure your heating system is in optimal working order. You can make sure your furnace is ready to run smoothly and efficiently by checking off these tasks with our professional advice.

Perform a visual examination

Examine the ductwork for holes, cracks, or other flaws that can let hazardous waste gasses back into your house. Verify that there are no obstructions or debris in the exterior ventilation cap.

Water stains on metal exhaust pipes may indicate moisture condensation inside the flue. Or perhaps you don’t have a good flue cap, which allows snow or rain to enter the chimney.

If something seems off, call for furnace repair Calgary. This is also necessary if you want a professional safety inspection to be certain nothing is wrong.

Replace the air filters

Air filters are most likely located in the furnace, or behind a vent grill in the wall or ceiling. You should change these filters every few months. Alternatively, you can clean and repurpose a permanent electrostatic filter. Regularly cleaning or changing your filters can extend the life of your system and keep debris out of it.

If your furnace has a humidifier, replace the filter and adjust the humidistat while you’re at it. This helps to keep your humidifier operating at peak performance. It also guarantees that the humidity level in your house is comfortable throughout the winter.

Clean and lubricate the blower motor

Although people who are knowledgeable about furnaces can try this DIY, it is best to have a technician do this as part of routine maintenance. This involves lubricating and cleaning the blower motor.

Professionals possess the knowledge and experience necessary to accurately assess whether lubrication is required. They can also complete the work efficiently while adhering to all safety precautions. This will increase the system’s lifespan and efficiency and maximize home comfort.

Maintain the flame sensor

This is a thin metallic rod in front of the furnace’s flame stream. It helps stop a potentially harmful accumulation of unburned gas. Carbon accumulation can contaminate a flame sensor over time.

Your skilled furnace specialist will use light grit sandpaper to gently scrape the sensor metal rod to clean it. Afterward, they’ll wipe away any leftover dust with a paper towel.

Examine the exhaust flue

Your furnace’s flue pipe releases exhaust gases and other combustion byproducts into the atmosphere outside of your home. This pipe is constructed of metal wrapped in an insulating substance. A specialist should examine the exhaust flue outside to ensure nothing is blocking the aperture.

Examine the carbon monoxide detectors and chimney

Small creatures or even carbon buildup can reside in chimneys. A technician should periodically examine them. You should also test or replace carbon monoxide detectors regularly as another line of defense against the “silent killer.” Hiring an expert to do a complete chimney check is advisable to find and fix such problems.

The takeaway

Although you can complete some of the furnace maintenance tasks, calling a professional for others is important. Avoid taking any action that could jeopardize your equipment’s warranty.